3.1.1 Visual external inspection of the whole truck for damage
Procedure
• Check truck for damage.
• Check the overhead guard for damage.
• Check operator position for damage.
• Check the operator mat and steps are non-slip and damage-free.
• Check the load handler (forks etc.) for visible signs of damage such as cracks,
bent or severely worn forks.
• Check static charge eliminator is present.
• Make sure the panels and covers are secure and check for damage.
• Check labels are legible and complete, see page 43.
• Check driver's seat, backrest and padding for damage.
• Check driver's seat adjustment and adjust if necessary (see page 123).
• Check seat belt and belt lock function properly and check for damage, see
page 127.
• Check travel control labels are legible and complete.
• Check hydraulic control labels are legible and complete.
• Check control panel for damage.
• Check control panel setting and adjust if necessary (see page 125 and see
page 126).
• Test the gas struts on the battery cover and check for damage.
•
Make sure tilt safety devices are present and check their adjustment(o), see
page 69.
• If using an attachment: Check bearing, guides and stops for wear and damage.
•
Check operator position padding for damage (o).
• Check that optional equipment such as mirrors, storage compartments, grips, etc.
function correctly and check for damage (o).
•
Check overhead guard cover for damage and make sure it is secure (o).
118
04.19 en-GB
To Next Page
Loading...
Need help?
General
