5.3.3 Transporting a load
Requirements
– Prepare the truck for operation, see page 138 or see
page 139.
– Load unit correctly lifted, see page 200 or see
page 201.
– Good ground conditions.
Procedure
Z
Always transport loads with both forks. When transporting heavy loads always
ensure that both forks are evenly laden.
• Press the deadman button.
• Raise the load handler until the load rests freely on the forks.
Z
Always transport a load outside the narrow aisle as low as possible, allowing for
ground clearance.
• Accelerate gradually.
• Travel at a constant speed.
• Adapt your travel speed to the conditions of the route and the load you are
transporting.
• Be prepared to brake at all times.
• Brake gently in normal circumstances.
• Only stop suddenly in dangerous situations.
• Reduce speed accordingly on narrow bends.
• Watch out for other traffic at crossings and passageways.
• Always travel with a lookout at blind spots.
202
04.19 en-GB
To Next Page
Loading...
Need help?
General
