Recovering the truck in the drive direction with and without load
Requirements
– Attachment in home position, see page 192.
– Load handler fully lowered, see page 171 or see page 211.
– Drive wheel brake released, see page 225.
Tools and Material Required
– Tow rope, towing capacity > 5 to..
Procedure
• Switch off the truck, to do this:
• Turn the key in the key switch (8) to the left as far as the stop and remove the
key.
•
Press the red button of the ISM access module (o) twice in a row.
• Press the emergency disconnect switch (9).
• Disconnect the battery.
• Route the tow rope (190) through the lifting eyes (78) on the overhead guard (11)
(see illustration).
WARNING!
Risk of injury during recovery operations
Do not stand between the tow truck and the recovered truck during a recovery
operation.
Recover the truck carefully and slowly in the drive direction.
235
04.19 en-GB
To Next Page
Loading...
Need help?
General
