8.6.2 Rack number entry (lift height)
Requirements
– Prepare the truck for operation, see
page 138 or see page 139.
– Drive the truck into the narrow aisle and
establish automatic guidance, see
page 159.
Procedure
• Using the numerical keypad (112) enter
the rack number.
Z
The rack number can be entered as a
single digit (0 - 9), 2-digit (00-99) or 3-
digit number (000-999).
For a 2-digit entry, the first number
entered is a multiple of ten and the
second a unit.
For a 3-digit entry, the first number
entered is a multiple of one hundred, the
second a multiple of ten and the third a
unit.
• If an incorrect entry is made it can be deleted by pressing the “CE” key on the
numerical keypad (112).
• Press "OK" on the numerical keypad (112) to save the area entry.
The entered rack number (207) is now shown above the fork in the driver's display.
An arrow (207) is also displayed to the left of the rack number that has been entered.
This arrow indicates whether the Main Lift needs to be raised or lowered to reach the
warehouse location.
267
04.19 en-GB
To Next Page
Loading...
Need help?
General
