8.7.5 Warehouse target destination entry
The destination for horizontal positioning can be entered in three different ways and
can be adapted to customer requirements:
– Manual destination input:
The required destination is entered and confirmed manually.
– Destination input with barcode scanner:
The required destination is entered with a barcode scanner.
– Destination input via radio:
The warehouse management system transmits the required destination to the
truck terminal by radio .
Warehouse destination manual entry (default setting)
Z
The position of the symbols can be adapted to customer requirements. The setting is
made by the manufacturer's customer service department. In this case the positions
(rack row, location (marker), compartment (height) and zone) must be entered so as
to match the symbol display.
Requirements
– Prepare the truck for operation, see page 138 or see page 139.
– Drive the truck into the narrow aisle and establish automatic guidance, see
page 159.
288
04.19 en-GB
To Next Page
Loading...
Need help?
General
