Model 6485 Picoammeter Instruction Manual SCPI Reference Tables 14-3
:CALCulate[1](continued)
:DATA? Return all CALC1 results triggered by INITiate. √
:LATest? Return last (latest) reading.
:CALCulate2 Path to configure and control limit testing (CALC2): 8 √
:FEED <name> Select input path for limit testing; CALCulate[1]
or SENSe[1].
SENS √
:FEED? Query input path for limit tests. √
:LIMit[1] Limit 1 Testing: √
:UPPer Configure upper limit: √
[:DATA] <n> Set limit; -9.99999e20 to 9.99999e20. 1.0 √
[:DATA]? Query upper limit. √
:LOWer Configure lower limit: √
[:DATA] <n> Set limit; -9.99999e20 to 9.99999e20. -1.0 √
[:DATA]? Query lower limit. √
:STATe <b> Enable or disable limit 1 test. OFF √
:STATe? Query state of limit 1 test. √
:FAIL? Return result of limit 1 test; 0 (pass) or 1 (fail). √
:LIMit2 Limit 2 Testing: √
:UPPer Configure upper limit: √
[:DATA] <n> Set limit; -9.99999e20 to 9.99999e20. 1.0 √
[:DATA]? Query upper limit. √
:LOWer Configure lower limit: √
[:DATA] <n> Set limit; -9.99999e20 to 9.99999e20. -1.0 √
[:DATA]? Query lower limit. √
:STATe <b> Enable or disable limit 2 test. OFF √
:STATe? Query state of limit 2 test. √
:FAIL? Return result of limit 2 test; 0 (pass) or 1 (fail). √
:NULL Configure and control Rel: √
:ACQuire Use input signal as Rel value.
:OFFSet <NRf> Specify Rel value; -9.999999e20 to
9.999999e20.
0.0 √
:OFFSet? Query Rel value. √
:STATe <b> Enable or disable Rel. OFF √
:STATe? Query state of Rel. √
:DATA? Return all CALC2 readings triggered by INITiate. √
:LATest? Return only the last (latest) reading.
Table 14-1 (continued)
CALCulate command summary
Command Description
Default
parameter
Ref
Section
SCPI
To Next Page
Loading...
Need help?
General
