Keysight B1505A User’s Guide, Edition 12 3-29
Accessories
• From HVSMU of N1262A-001 and 002
HV(jack) connector. For connecting 16493T HVSMU cable from the HVSMU
or HVMCU.
• From SMU of N1262A-010 and 020
Triaxial connector. For connecting 16494A triaxial cable from the Force
connector of the HP/MPSMU directly or via the N1261A-001 protection
adapter.
• From SMU of N1262A-011 and 021
HV(jack) connector. For connecting 16493T HVSMU cable from the
N1261A-003 protection adapter connected to the HP/MPSMU.
• From UHV of N1262A-023
UHV(jack) connector. For connecting UHV cable from the N1268A ultra high
voltage expander.
• Output of N1262A-001, 002, 011, and 021
SHV(jack) connector. Signal must be extended to a terminal of a DUT. For
making the connection, use high voltage cable with SHV(plug) connector,
manipulators, and such.
• Output of N1262A-010 and 020
Triaxial connector. Signal must be extended to a terminal of a DUT. For making
the connection, use cable with Triaxial(m) connector, manipulators, and such.
• Output of N1262A-023
UHV(jack) connector. Signal must be extended to a terminal of a DUT. For
making the connection, use ultra high voltage cable with UHV(plug) connector,
manipulators, and such.
To Next Page
Loading...
Need help?
General
