1-8 Keysight B1505A User’s Guide, Edition 12
Getting Started
To Launch EasyEXPERT
To Create Workspace
For the screen as shown in Figure 1-2, perform the following steps. To cancel
creating workspace, click Prev.
1. Enter the name of the new workspace into the above-entry field.
Check Allow other users to access this workspace box if you want to create a
public workspace that is opened for all users.
2. If you are the owner of the existing workspace, you can change the name of the
existing workspace.
If you want to rename the existing workspace, enter the name into the
below-entry field.
Check Allow other users to access this workspace box if you want to set it to a
public workspace that is opened for all users.
3. Click OK.
Skip to “To Use Tracer Test Mode” on page 1-10, “To Use Application Test Mode”
on page 1-12, or “To Use Classic Test Mode” on page 1-14.
Figure 1-2 To Create Workspace
To Next Page
Loading...
Need help?
General
