Keysight B1505A User’s Guide, Edition 12 2-7
Introduction
Overview
• Keysight N1274A On-Wafer Gate Charge Measurement Adapter/Selector for 20
A/3 kV
Adapter to enable on-wafer gate charge measurements using the HCSMU (max.
20 A) and HVSMU (max. 3 kV). This equips an internal selector to
automatically switch signal paths of I-V measurement and gate charge
measurement. The N1274A is used with the N1258A module selector.
• Keysight N1275A On-Wafer Gate Charge Measurement Adapter for N1265A
Adapter to enable on-wafer gate charge measurements with the UHCU (max.
500 A) and HVSMU (max. 3 kV). You need to switch signal paths of I-V
measurement and gate charge measurement manually. And also, you need
manual switching between high voltage and high current gate charge
measurements.
Keysight EasyEXPERT Software
Keysight EasyEXPERT software is a specially-designed Windows application
program for controlling Keysight B1500 series. The EasyEXPERT provides the
easy and effective measurement and analysis environment with intuitive graphical
user interface (GUI), touch screen LCD panel, keyboard, and mouse. Some of the
functions are listed below.
• Single measurement, repeat measurement, and append measurement
• Module selector control
• Measurement/setup data management by workspace
• Graph display and analysis with markers, cursors, and lines; and auto analysis
• Data import/export capability, data output by CSV/XML format, and graph
output by EMF/BMP/GIF/PNG format
• Maintenance; self-test and self-calibration
• Remote control function from an external computer
The EasyEXPERT has the following measurement execution environments.
• Application test
• Classic test
• Tracer test
•Quick test
To Next Page
Loading...
Need help?
General
