Keysight Technologies B1505A User Manual

5-24 Keysight B1505A User’s Guide, Edition 12
Measurement Examples
I-V and Capacitance Measurements Using N1272A
I-V and Capacitance Measurements Using
N1272A
This section introduces the Power MOSET Ciss (input capacitance) and IDSS
(drain-source leak current) measurement examples with controlling the N1272A
Device Capacitance Selector and consists of the following sub-sections.
• “Preparing Measurement”
• “System Configuration and Open/Short Calibration”
• “Preparing Capacitance Measurement Setups”
• “Performing Capacitance Measurement”
• “Preparing IV Measurement Setups”
• “Performing IV Measurement”
• “Available Application Test List”
Preparing Measurement
WARNING Set the instrument output off before connecting or disconnecting a connection
wire.
Press the B1505A front panel
Stop key to set the output off. And confirm that
the B1505A front panel High Voltage indicator is not lit.
Désactivez la sortie de l'appareil avant de brancher ou de débrancher un câble
de connexion.
Appuyez sur la touche
Stop du panneau avant du B1505A pour désactiver la
sortie. Et confirmez que l'indicateur de tension High du panneau avant du
B1505A n'est pas allumé.

Keysight Technologies B1505A Specifications

General

Brand	Keysight Technologies
Model	B1505A
Category	Measuring Instruments
Language	English