Keysight Technologies B1505A User Manual

Keysight B1505A User’s Guide, Edition 12 5-39
Measurement Examples
Temperature Controlled by ThermoStream
Temperature Controlled by ThermoStream
This section introduces a measurement example with the ambient temperature
control realized by the EasyEXPERT built-in application tests which support the
inTEST ThermoStream.
This measurement is realized by using the Quick Test. Create and save the test
setups for temperature control and the test setup for measurement in a preset group
(My Favorite) and define the execution order in the quick test. Temperature control
and measurement are automatically executed by running this quick test.
This section consists of the following sub-sections:
• “Preparing Measurement”
• “Preparing Temperature Control and Measurement Setups”
• “Performing Temperature Control and Measurement”
• “Available Application Test List”
Preparing Measurement
WARNING Set the instrument output off before connecting or disconnecting a connection
wire.
Press the B1505A front panel
Stop key to set the output off. And confirm that
the B1505A front panel High Voltage indicator is not lit.
Désactivez la sortie de l'appareil avant de brancher ou de débrancher un câble
de connexion.
Appuyez sur la touche
Stop du panneau avant du B1505A pour désactiver la
sortie. Et confirmez que l'indicateur de tension High du panneau avant du
B1505A n'est pas allumé.

Keysight Technologies B1505A Specifications

General

Brand	Keysight Technologies
Model	B1505A
Category	Measuring Instruments
Language	English