Keysight B1505A User’s Guide, Edition 12 5-7
Measurement Examples
Gate Charge Measurement
Performing the Measurement
1. Click the Single button to start measurement. This opens the Data
Display window.
2. When a message is displayed to prompt for the high current gate charge
measurement connections, connect the devices properly and then click OK. This
starts the high current gate charge measurement.
3. When a message is displayed to prompt for the high voltage gate charge
measurement connections, connect the devices properly and then click OK. This
starts the high voltage gate charge measurement.
Checking the Measurement Result
After the measurement, the gate charge characteristics will be displayed on the Data
Display window. If an error occurs, follow the error message.
To Next Page
Loading...
