1-2 Keysight B1505A User’s Guide, Edition 12
Getting Started
This chapter describes the basic operations of Keysight B1505A. Before learning
the product details, let’s try to use the B1505A briefly. The operations need the
B1505A, power cable, and USB keyboard only (USB mouse and stylus pen are
optional). Keysight B1505A also requires Keysight EasyEXPERT software as its
graphical user interface.
During the operations, you will not connect device under test. Open all
measurement terminal.
This chapter consists of the following sections.
• “To Turn On/Off B1505A”
• “To Launch EasyEXPERT”
• “To Use Tracer Test Mode”
• “To Use Application Test Mode”
• “To Use Classic Test Mode”
• “To Perform Measurement”
• “To Use Analysis Tools”
NOTE If you use the B1505A at the first time
If this is the first time to turn Keysight B1505A on after the delivery, you need to
perform the initial setup of the B1505A. See “Inspection and Installation” on page
4-9. After the initial setup and if no users are added, you can automatically logon as
“Keysight B1500 User” account without password.
To Next Page
Loading...
