Keysight B1505A User’s Guide, Edition 12 1-13
Getting Started
To Use Application Test Mode
To enter the value, use the USB keyboard or the screen/numeric keyboard opened by
clicking the right button of the entry field.
See “To Perform Measurement” on page 1-16 to start measurement.
NOTE Test Definitions
Test definitions are the built-in test setups that have been defined and stored in the
EasyEXPERT as the application library. The EasyEXPERT contains more than
fourty test definitions. You can execute the test without modifications. Also you can
create your own test setup/definition by making any changes. All furnished test
definitions are just sample. Keysight Technologies is NOT LIABLE for any
damages caused by the samples.
Figure 1-6 Display Example of Application Test Setup Screen
To Next Page
Loading...
