• When the RED indicator lights, lethal voltage (±10 kV dc/pulse) may appear at
measurement terminals.
• Usually use the interlock function.
• Do not operate the instrument unless another person is around the work space who is
familiar with instrument operation and hazards or administering first aid.
• Potentials less than ±500 V may cause death under certain conditions. Therefore,
adequate preventive measures must be taken at all times!
FIRST AID FOR ELECTRIC SHOCK
SPECIAL ATTENTION TO RESCUE IN SAFETY
• Never rush into an accidental situation.
• Take special attention to the following notices to prevent second accident.
• Do NOT touch the CASUALTY or conductive surface with your hands unprotected.
• Shut off high voltage at once.
• Disconnect AC mains.
• If it is unsure to make safe, the following procedure will helps to protect your lives
during the CASUALTY is rescued.
• Stand on a dry insulating material; use a dry wooden or plastic implement to free
the CASUALTY from contact with hazardous electrical source.
• Ground the circuit to de-energize.
WARNING
High Voltage
is used in the operation of this equipment.
LETHAL VOLTAGE on CONTACT
may be present at measurement terminals,
if you fail to take in all safety precautions!
To Next Page
Loading...
