Keysight Technologies B1505A

2-48 Keysight B1505A User’s Guide, Edition 12
Introduction
Measurement Resources
Table 2-23 Measurement Parameters
Primary Parameter Secondary Parameter
R (resistance, ) X (reactance, )
G (conductance, S) B (susceptance, S)
Z (impedance, )  (phase, radian)
Z (impedance, )  (phase, degree)
Y (admittance, S)  (phase, radian)
Y (admittance, S)  (phase, degree)
Cp (parallel capacitance, F) G (conductance, S)
Cp (parallel capacitance, F) D (dissipation factor)
Cp (parallel capacitance, F) Q (quality factor)
Cp (parallel capacitance, F) Rp (parallel resistance, )
Cs (series capacitance, F) Rs (series resistance, )
Cs (series capacitance, F) D (dissipation factor)
Cs (series capacitance, F) Q (quality factor)
Lp (parallel inductance, H) G (conductance, S)
Lp (parallel inductance, H) D (dissipation factor)
Lp (parallel inductance, H) Q (quality factor)
Lp (parallel inductance, H) Rp (parallel resistance, )
Ls (series inductance, H) Rs (series resistance, )
Ls (series inductance, H) D (dissipation factor)
Ls (series inductance, H) Q (quality factor)