Keysight M8070A Programming Guide 103
SCPI Command Reference 5
*OPT?
Syntax *OPT?
Description The *OPT? query returns the installed options for each installed module. If
no options are installed, only the model number(s) of the installed
module(s) are returned.
Example *OPT?
(M1-M8041A c08,c16)(M2-M8061A,004,008)
*RCL
Syntax *RCL
Description The *RCL command recalls a predefined read only instrument state
setting. This command recalls the same device-specific functions effected
by the *RST and *SAV commands.
The range is *RCL 1 to *RCL 10.
*RST
Syntax *RST
Description The Reset Command (*RST) sets the device-specific functions to a known
state that is independent of the past-use history of the device.
*SAV
Syntax *SAV
Description The *SAV command saves a predefined read only instrument state setting.
This command saves the same device-specific functions effected by the
*RST and *RCL commands.
The range is *SAV 1 to *SAV 10.
To Next Page
Loading...
