Keysight M8070A Programming Guide 125
SCPI Command Reference 5
:STATus:INSTrument Subnode
The :STATus:INSTrument commands return the ‘current’ value/condition
of several predefined device states. These commands are a set of SCPI
queries which return true (1) or false (0).
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 29
Name Description under
:CLOSs? :STATus:INSTrument:CLOSs? on page 126
:DLOSs? :STATus:INSTrument:DLOSs? on page 126
:SLOSs? :STATus:INSTrument:SLOSs? on page 126
:SALoss? :STATus:INSTrument:SALoss? on page 127
:ERRor? :STATus:INSTrument:ERRor? on page 127
:OVERload? :STATus:INSTrument:OVERload? on page 127
:RCINput? :STATus:INSTrument:RCINput? on page 128
:RUN? :STATus:INSTrument:RUN? on page 128
:CDR:ULOCked? :STATus:INSTrument:CDR:ULOCked? on
page 128
To Next Page
Loading...
