Keysight Technologies J-BERT M8020A

Keysight M8070A Programming Guide 227
SCPI Command Reference 5
:OUTPut:DEMBedding Subnode
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 53
Name Description under
:SCABle:STATe[?] :OUTPut:DEMBedding:SCABle:STATe[?] on
page 228
SPARameter:STATe[?] :OUTPut:DEMBedding:SPARameter:STATe[
?] on page 228
:SPARameter:PROFile[?] :OUTPut:DEMBedding:SPARameter:PROFil
e[?] on page 228
:SPARameter:IPORt[?] :OUTPut:DEMBedding:SPARameter:IPORt[?
] on page 229
:SPARameter:OPORt[?] :OUTPut:DEMBedding:SPARameter:OPORt[
?] on page 229
:OUTPut
:DEMBedding
[:SCABle]
[:STATe][?]
:SPARameter
[:STATe][?]
:PROFile[?]
:IPORt[?]
:OPORt[?]