Keysight Technologies J-BERT M8020A User Manual

Keysight M8070A Programming Guide 279
SCPI Command Reference 5
:MMEMory:WORKspace:SETTings[:USER]:DELete
Syntax :MMEMory:WORKspace:SETTings[:USER]:DELete “Path”
Input
Parameters
“Path”: Specify location of stored instrument state.
Description This command deletes the instrument state from the specified location.
Example :MMEM:WORK:SETT:DEL “TestConfigurationSATA_1”
:MMEM:WORK:SETT:DEL “SATA/TestConfiguration_1”
:MMEM:WORK:SETT:DEL “SATA/TestConfiguration_2”
:MMEMory:WORKspace:SETTings:FACTory:CATalog?
Syntax :MMEMory:WORKspace:SETTings:FACTory:CATalog?
Description This command creates a list of “predefined” setting names located in the
“Factory” area of the workspace.
Example :MMEM:WORK:SETT:FACT:CAT?
“PCIe3_InitialTestSetting”
:MMEMory:WORKspace:SETTings:FACTory:RECall
Syntax :MMEMory:WORKspace:SETTings:FACTory:RECall “Path”
Input
Parameters
“Path”: Specify location of stored instrument state.
Description This command recalls/restores the instrument state from a “factory
predefined” addressed location.
Example :MMEMory:WORKspace:SETTings:FACTory:RECall
"PCIe1/PCIe1_compliance_ASIC"

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English