Keysight Technologies J-BERT M8020A

Keysight M8070A Programming Guide 203
SCPI Command Reference 5
OUTPut Subsystem
The OUTPut subsystem controls the output ports of the pattern generator.
This subsystem has the following SCPI structure:
:OUTPut
:GLOBal
[:STATe][?]
[:STATe][?]
:CONFig
:SOURce[?]
:DRATe?
:POLarity[?]
:TVOLtage[?]
:TCONfig[?]
:COUPling[?]
:DIVider[?]
:FREQuency
:DIVider[?]
:CALibration
:SKEW[?]
:EIDLe
[:STATe][?]
:DATA
:XOVer[?]
:F2Jitter[?]
:STATe[?]
:DEEMphasis
…
:EINSertion
…
:TRIGger
…
:DEMBedding
…
:EMBedding
…