Keysight Technologies J-BERT M8020A

Keysight M8070A Programming Guide 489
SCPI Command Reference 5
:DATA:LINecoding Subnode
The :DATA:LINecoding subnode controls which line coding is being used
when sending or receiving the digital data.
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 96
Name Description under
:DATA:LINecoding[:VALue][?]
:DATA:LINecoding[:VALue][?] on page 490
:DATA:LINecoding:PAM4:MAP
Ping[?]
:DATA:LINecoding:PAM4:MAPPing[?] on
page 490
:DATA:LINecoding:PAM4:MAP
Ping:CUSTom[?]
:DATA:LINecoding:PAM4:MAPPing:CUSTom
[?]
on page 491
:DATA:LINecoding:PAM4[:SY
MBol]:LEVel(1|2)[?]
:DATA:LINecoding:PAM4[:SYMBol]:LEVel(1|
2)[?]
on page 491
:DATA
:LINecoding
[:VALue][?]
:PAM4
:MAPPing[?]
:MAPPing:CUSTom[?]
[:SYMBol]:LEVel(1|2)[?]