460 Keysight M8070A Programming Guide
5 SCPI Command Reference
:SYSTem:INSTrument:LTRaining[:LOG]:CLEar
Syntax :SYSTem:INSTrument:LTRaining[:LOG]:CLEar
Description This command clears the Link Training logs.
Example :SYST:INST:LTR:LOG:CLE
:SYSTem:INSTrument:LTRaining[:LOG]:BLOCk?
Syntax :SYSTem:INSTrument:LTRaining[:LOG]:BLOCk?
Description The content of the log file is returned as definite block. (see
:SYSTem:INSTrument:LTRaining[:LOG]?) Control character (e.g. Line Feed)
are contained in the log file. This can interrupt the transfer to the host
computer. A definite block is used to transfer data streams that can
contain special characters. see SCPI language definition or IEEE 488.2
-BLOCK PROGRAM DATA.
Example :SYSTem:INSTrument:LTRaining:LOG:BLOCk?
To Next Page
Loading...
