Keysight Technologies J-BERT M8020A User Manual

Keysight M8070A Programming Guide 471
SCPI Command Reference 5
DATA Subsystem
The DATA subsystem is used to select patterns, define symbol parameters,
define sequence blocks and loops and synchronize the pattern.
This subsystem has the following SCPI structure:
The subsystem has the following subnodes:
Table 92
Name Description under
:PATTern :DATA:PATTern Subnode on page 472
:SEQuence :DATA:SEQuence Subnode on page 480
:SYNC :DATA:SYNC Subnode on page 487

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English