472 Keysight M8070A Programming Guide
5 SCPI Command Reference
:DATA:PATTern Subnode
For additional information about patterns, refer to Working with Patterns
on page 36.
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 93
Name Description under
:USE[?] :DATA:PATTern:USE[?] on page 473
:IDATa[?] :DATA:PATTern:IDATa[?] on page 474
:BLENgth? :DATA:PATTern:BLENgth? on page 474
:CATalog? :DATA:PATTern:CATalog? on page 475
:CINFormation? :DATA:PATTern:CINFormation? on page 475
:DESCription[?] :DATA:PATTern:DESCription[?] on page 476
:DELete :DATA:PATTern:DELete on page 476
:PACKed[?] :DATA:PATTern:PACKed[?] on page 477
:IMPort :DATA:PATTern:IMPort on page 477
:EXPort :DATA:PATTern:EXPort on page 479
To Next Page
Loading...
