Keysight Technologies J-BERT M8020A

Keysight M8070A Programming Guide 479
SCPI Command Reference 5
Data=
1010
N4903B J-BERT Patterns
N4903B J-BERT patterns are always imported as bit coded patterns with
no mask and no squelch. The B part of an alternate pattern will be
imported as <pattern-name>B.
The following is an example of an N4903B J-BERT pattern import:
Example DATA:PATT:IMP "current:x","C:\N4903B\Pattern\xxx.ptrn"
:DATA:PATTern:EXPort
Syntax :DATA:PATTern:EXPort <pattern-name>, <file-name>
Input
Parameters
<pattern-name>: Specify the pattern name.
<file-name>: Specify the location of the pattern file to be exported.
Description This command exports a pattern to a file in the M8020A/M8030A import
file format.
Example :DATA:PATT:EXP "current:x","C:/Users/jsmith/Desktop/test"