Keysight Technologies J-BERT M8020A User Manual

478 Keysight M8070A Programming Guide
5 SCPI Command Reference
<error-used> field requires version 1.0.1.
Note that if <error-used> is 1, <mask-used> and <squelch-used> must
both be 0. Also the coding must be BIT or B8B10. B128B130 and
B128B132 are not supported.
The next line describes the number of symbols, symbol coding, mask
usage and squelch usage as described in :DATA:PATTern:USE command.
The next line allows specifying a description.
The next line allows changing the packing of the actual <data> part similar
to the :DATA:PATTern:PACK command. If not specified, 8 is assumed. For
details on packing and its parameters, refer to :DATA:PATTern:PACKed[?]
on page 477.
The <data> in a separate line contains the sequence of bytes as specified
by the packing. For more details on how to edit data, refer to the chapter
“Setting up Patterns” of the M8070A User Guide.
Example File:
Version=M8000 1.0.0
Use=4
Pack=1

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English