Keysight Technologies J-BERT M8020A User Manual

Keysight M8070A Programming Guide 109
SCPI Command Reference 5
Location and Module Mapping - Reference
The following table lists locations and their respective modules.
Table 25 Location wise mapping of modules
Location Module
Data Out M8041A,M8051A, M8061A, M8062A, M8195A and M8045A
Data In M8041A,M8051A, M8061A, M8062A and M8046A
System M8041A
Clk Gen M8041A, M8062A, M8195A and M8045A
Ref Clk Out M8041A and M8045A
Clk Out M8041A and M8045A
Cln Clk Out M8062A
Trig Out M8041A and M8045A
Sys Out A M8041A and M8045A
Sys Out B M8041A and M8045A
Ctrl Out A M8041A, M8051A, M8045A and M8046A
Sys In A M8041A and M8045A
Sys In B M8041A and M8045A
Ctrl In A M8041A, M8051A, M8045A and M8046A
Ctrl In B M8041A and M8051A
Elect Idle In M8061A and M8062A
Clk In M8046A
NOTE
The “System” location is only available for few SCPIs. It is not visible on
the M8070A user interface.

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English