Keysight Technologies J-BERT M8020A - Command Syntax to Find MinMax Values

108 Keysight M8070A Programming Guide
5 SCPI Command Reference
Command Syntax to Find Min/Max Values
The following example illustrates the syntax to find min/max values for any
system parameter:
In the below example, “Voltage Amplitude” is the parameter for which
min/max values are to be found.
:SOURce:VOLTage:AMPLitude?
Syntax for
Min/Max Value
:SOURce:VOLTage:AMPLitude? ‘identifier’, <MIN/MAX>
Example for Min
Value
:SOURce:VOLTage:AMPLitude? ‘M1.DataOut’, MIN
Example for Max
Value
:SOURce:VOLTage:AMPLitude? ‘M1.DataOut’, MAX