Keysight Technologies J-BERT M8020A

182 Keysight M8070A Programming Guide
5 SCPI Command Reference
[:SOURce]:SSCLocking Subnode
Spread Spectrum Clocking (SSCL) is used for reducing the peak
electromagnetic radiation. The clock out signal and data out stream are
modulated with a repetitive low-frequency waveform.
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 44
Name Description under
[:STATe][?] [:SOURce]:SSCLocking[:STATe][?] on page 183
GLOBal[:STATe][?] :SOURce]:SSCLocking:GLOBal[:STATe][?] on
page 183
:DEViation[?] [:SOURce]:SSCLocking:DEViation[?] on
page 184
:TYPE[?] [:SOURce]:SSCLocking:TYPE[?] on page 184
:PROFile[?] [:SOURce]:SSCLocking:PROFile[?] on page 185
:SHAPe[?] [:SOURce]:SSCLocking:SHAPe[?] on page 185
:FREQuency[?] [:SOURce]:SSCLocking:FREQuency[?] on
page 186
[:SOURce]
:SSCLocking
[:STATe][?]
:DEViation[?]
:TYPE[?]
:PROFile[?]
:SHAPe[?]
:FREQuency[?]
:GLOBal[:STATe][?]