Keysight Technologies J-BERT M8020A

Keysight M8070A Programming Guide 175
SCPI Command Reference 5
[:SOURce]:JITTer:SWEep Subnode
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 43
Name Description under
[:STATe][?] [:SOURce]:JITTer:SWEep[:STATe][?] on
page 177
:FREQuency:STARt[?] [:SOURce]:JITTer:SWEep:FREQuency:STAR
t[?] on page 177
:FREQuency:STOP[?] [:SOURce]:JITTer:SWEep:FREQuency:STOP
[?] on page 177
:TIME[?] [:SOURce]:JITTer:SWEep:TIME[?] on page 178
[:SOURce]
:JITTer
:SWEep
[:STATe][?]
:FREQuency
:STARt[?]
:STOP[?]
:TIME[?]
:STEP
:DISTance[?]
[:VALue]?
:AMPLitude
:MODE[?]
[:VALue]?
:PLOT
:INPut?
[:VALue]?
:DATA
:FILE[?]