Keysight M8070A Programming Guide 487
SCPI Command Reference 5
:DATA:SYNC Subnode
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 95
:DATA:SYNC[:ONCE]
Syntax :DATA:SYNC[:ONCE] <identifier>
Input
Parameters
<identifier>: 'M*.DataIn1', 'M*.DataIn2' or 'M*DataIn'
Description This command initiates a pattern resynchronization.
This SCPI is applicable for M8041A, M8051A, M8062A and M8046A.
Example :DATA:SYNC ‘M1.DataIn1’
Name Description under
[:ONCE] :DATA:SYNC[:ONCE] on page 487
:TYPE[?] :DATA:SYNC:TYPE[?] on page 488
:THReshold[?] :DATA:SYNC:THReshold[?] on page 488
To Next Page
Loading...
