Keysight Technologies J-BERT M8020A User Manual

124 Keysight M8070A Programming Guide
5 SCPI Command Reference
:STATus:OPERation:RUN:ENABle[?]
Syntax :STATus:OPERation:RUN:ENABle <NRf>
:STATus:OPERation:RUN:ENABle?
Description This command sets the bits in the event enable register that can generate
a summary bit used to determine if the hardware is functioning properly.
The query returns the weighted value of the bits that are set in the event
enable register.
:STATus:OPERation:RUN[:EVENt]?
Syntax :STATus:OPERation:RUN[:EVENt]?
Description This query returns the contents of the Operation Status event register.
:STATus:OPERation:RUN:NTRansition[?]
Syntax :STATus:OPERation:RUN:NTRansition <NRf>
:STATus:OPERation:RUN:NTRansition?
Input
Parameters
<NRf>: Set transition filter state.
Description This command sets the transition filter state in the Operation Status
Register structure. The query returns the weighted value of the bits that
are set to pass negative transitions in the transition filter.
:STATus:OPERation:RUN:PTRansition[?]
Syntax :STATus:OPERation:RUN:PTRansition <NRf>
:STATus:OPERation:RUN:PTRansition?
Input
Parameters
<NRf>: Set transition filter state.
Description This command sets the transition filter state in the Operation Status
Register structure. The query returns the weighted value of the bits that
are set to pass positive transitions in the transition filter.

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English