Keysight M8070A Programming Guide 135
SCPI Command Reference 5
:TRIGger:CMULtiplier:FREQuency:DETect
Syntax TRIGger:CMULtiplier:FREQuency:DETect ‘identifier’
Input
Parameters
‘identifier’: ‘M1.ClkGen’
Description The external provided clock at the REF CLK IN port is measured once and
will be multiplied/divided for calculating the system frequency (data rate).
This SCPI is applicable for M8041A and M8045A.
Example :TRIG:CMUL:FREQ:DET ‘M1.ClkGen’
To Next Page
Loading...
