196 Keysight M8070A Programming Guide
5 SCPI Command Reference
The following table describes the list of presets for selected standards and
traces.
Table 46 Preset List for Selected Standards and Traces (For M8041A and M8051A)
.
Example :SOUR:INT:ISYM:PRES 'M2.DataOut1',P1
P1 P2
SCPI Name f1/GHz L1/dB f2/GHz L2/dB
PCIe3 Short P1 1 -3.0 4 -9.6
PCIe3 Long P2 1 -5.6 4 -17.9
M-PHY G3A Ch1 P3 0 0.0 4.992 -6.0
M-PHY G3A Ch2 P4 1.248 -4.1 4.992 -13.9
M-PHY G3B Ch1 P5 0 0.0 5.83 -5.8
M-PHY G3B Ch2 P6 1.458 -4.2 5.83 -13.8
M8048A 7.7” P7 0 0.0 4 -4.4
M8048A 9.4” P8 0 0.0 4 -6.0
M8048A 11.1” P9 1 -1.9 4 -6.7
M8048A 12.8” P10 1 -2.3 4 -7.1
M8048A 14.4” P11 1 -2.7 4 -8.1
M8048A 16.1” P12 1 -3.0 4 -9.0
M8048A 24.4 P13 1 -4.5 4 -13.8
SAS-3 12 Gb/s P14 1 -4.5 4 -13.8
MIPI-Short P15 0 0.0 5 -4.85
MIPI-Standard P16 1.25 -3.75 5 -11.8
MIPI-Long P17 1.25 -6.3 5 -20.0
To Next Page
Loading...
