272 Keysight M8070A Programming Guide
5 SCPI Command Reference
Timestamp: As timestamp the UNIX epoch time is used; it is defined as
elapsed seconds, milliseconds etc. since 01.01.1970 UTC.
Location: It’s a string referred to the place the bit counter are located. This
parameter is important if a group name is used as ‘Identifier’.
Counted1s: The number of received ones since start of accumulation
period
Counted0s: The number of received zeros since start of accumulation
period.
Erroneous1s: The number of received erroneous ones since start of
accumulation period.
Erroneous0s: The number of received erroneous zeros since start of
accumulation period.
Additional Counters for 8b10b coding:
• ComparedSymbols:
• ErroredSymbols:
•IllegalSymbols:
•WrongDisparity:
•FillerSymbols:
• ReceivedSymbols:
• Frames:
• ErroredFrames:
Additional Counters for 128/130 and 128/132 coding:
•Blocks:
• ErroredBlocks:
•IllegalSyncHeaders:
•FillerSymbols:
• ModifiedFillerSymbols:
• Frames:
• ErroredFrames:
• Additional Counter for 128/132 coding:
• CorrectedSyncHeaders:
To Next Page
Loading...
