Keysight Technologies J-BERT M8020A - Page 82

82 Keysight M8070A Programming Guide
3 Programming Examples
NOTE
If the M8070A software is running on Windows 8 or 8.1, the VXI-11
protocol is not supported.
Example:
“SCPI Access (VXI-11): TCPIP0::localhost::inst0::INSTR”
does not work on Windows 8 or 8.1.
In this case, the HiSLIP protocol should be used as shown below:
“SCPI Access (HiSLIP): TCPIP0::localhost::hislip0::INSTR”