Appendix C 237
Firmware Update
Firmware Update
C. Firmware Update
2. Press Service Menu - Administrator Menu - Exit E5052B - OK on the menu bar.
Step 6. Double-click the “My Computer” icon on the Windows desktop.
Step 7. Double-Click the “Removable Disk (G:)” icon.
Step 8. Remove the old version of the firmware using the following procedure.
1. Double-Click “Setup.vbs” icon. The E5052B Setup Wizard (uninstall) will start
automatically as shown in Figure C-1.
2. Click on the OK button.
Figure C-1 E5052B Setup Wizard (uninstall)
3. Please wait until “Uninstall Wizard” (Figure C-2) disappears.
Figure C-2 E5052B Uninstall Wizard
Step 9. Install the new version of the firmware using the following procedure.
1. The E5052B Setup Wizard will start automatically as shown in Figure C-3.
To Next Page
Loading...
