Keysight E5052B - Function Specific Troubleshooting

Chapter 4 61
Troubleshooting
Booting Process Troubleshooting
4. Troubleshooting
Step 1. Splash Screen
The splash screen is displayed with Keysight logo as shown in Figure 4-4.
If the splash screen is displayed, you can assume that the A20 digital motherboard is
functioning correctly.
NOTE While the splash screen is displayed, if you want to run the BIOS setup utility, press F2 key
as soon as in the screen.
.
Figure 4-4 Splash Screen
Step 2. Windows boot screens
The Windows boot screens are displayed. The Windows boot screens consist of two
screens. Each screen is displayed in the order as shown in Figure 4-5. If the Windows boot
screens are displayed, it is assumed that the A27 HDD works. While the Windows screens
are displayed, Windows operating system is starting up.
Figure 4-5 Windows boot screens
If you encounter the following problems, try to reinstall the operating system before
replacing the A27 HDD.
e5071cse1061
3UHVV)IRU6\VWHP8WLOLWLHV
e5071cse1058
3UHVV)IRU6\VWHP8WLOLWLHV