Pin Function Available configurable pins
Digital I/O and Digital In Pins 1 through 7
External Trigger In/Out Pins 1 through 7
Fault Out Pins 1 and 2
InhibitIn Pin 3
OutputState Pins 4 through 7
Common Pin 8
In addition to the configurable pin functions, the active signal polarity for each pin is also configurable.
When Positive polarity is selected, a logical true signal is a voltage high at the pin. When Negative
polarity is selected, a logical true signal is a voltage low at the pin.
For more information on configuring the digital port functions, refer to Using the Digital Control Port.
Keysight N6705C Operating and Service Guide 75
2 Installation
To Next Page
Loading...
