Keysight Technologies N9040B UXA Signal Analyzer Service Guide 457
Assembly Replacement Procedures
Motherboards
6. Serial Number Prefix ≥ 5605:
— Refer to Figure 15-104. Remove the RF bracket (1) by removing the
eleven (or thirteen with Option RTS) screws (2) (0515-0372), and
the six screws (3) (0515-1946), using the T-10 driver.
Figure 15-104 RF Bracket Removal,
Serial Number ≥ Prefix 5605
7. Remove the fan bracket. Refer to the “Fan Assembly” removal procedure.
8. Refer to Figure 15-105. Remove the front brace (1) by removing the
eleven screws (2) (0515-0372).
To Next Page
Loading...
