Kohler KDI 2504TM

11
INFORMATION ABOUT OPTIONAL
COMPONENTS
EN 164
5.
Undo the screws D and remove the plate E and the pi
n
F.
Fig 11.46
6.
Undo the screws G and H remove the alternator L.
Fig 11.47
7.
Undo the screws M and remove the bracket N.
Fig 11.48
11.4.2 Assembly
1.
Secure the bracket N using the screws M on the cylinder
head P (tightening torque at 25 Nm).
Fig 11.49