Kohler KDI 2504TM

GLOSSARY
15
177
EN
Fig.:
Figure.
Functional
units:
Component, or group of main components, able to carry out specific functions on the
engine.
G
Galvanised:
Material that has undergone surface protection treatment.
Grinding (valves and
seats):
Cleaning operation of the valves and seats carried out with an abrasive paste (refer
to an authorised service station for this type of operation).
H
Heater:
A device that heats the intake air by means of an electrical resistor.
Heavy
conditions:
Type of extreme condition referred to the work environment in which the engine is used
(very dusty - dirty area, or in a contaminated environment due to various types of gas).
I
Idle speed operation:
Operation of a running engine with the vehicle stopped and on idle speed.
K
KDI:
"Kohler Direct Injection"
M
Maintenance -
periodic
A group of maintenance actions that have the sole objective to control and replace
elements on their expiry, without modifying or improving the functions carried out by
the system, neither increasing the value nor improving performance.
MAX:
Maximum.
Methyl ester:
It is a mixture of products by means of a chemical conversion of oils and animal and/or
vegetable fat, which is used to produce Biofuel.
Min.:
Minutes.
MIN:
Minimum.
Model:
Model, engine identification plate, which indicates the engine's model.
N