Kongsberg Simrad EK80 - Defining the IP Address on the Processor Unit Network Adapter for Communication with the Transceiver

394149/D
205
6SelectOKtosavethelicensestringandclosetheTypeLicenseStringdialogbox.
7VerifythatthelicensestringisplacedintheCurrentlyactivelicenseslist.
Ifnecessary,selectthelicensestringontheleftside,andclickthearrowbutton[>]
tomoveittotheCurrentlyactivelicenseslist.
8SelectApplyandthenClosetosavealltheparametersandclosetheInstallation
dialogbox.
Relatedtopics
TurningontheEK80forthersttime,page199
Settingtowork,page185
DeningtheIPaddressontheProcessorUnitnetwork
adapterforcommunicationwiththetransceiver
TheProcessorUnitandthetransceiver(s)communicateonahighcapacityEthernet
cable.Ifmorethanonetransceiverisused,anEthernetswitchisadded.OntheProcessor
Unit,denetheIPaddressandSubnetmaskfortheEthernetportusedtocommunicate
withthetransceiver(s).TheEK80automaticallyassignsanIPaddresstoeachtransceiver
whentheyareturnedoffandon.
Prerequisites
ThisprocedureismadefortheMicrosoft
®
Windows
®
10operatingsystem.Itisassumed
thatyouarefamiliarwiththisoperatingsystem.
Context
AslongasyoudonotchangetheProcessorUnittoanothercomputer,orreplacethe
networkadapterinyourProcessorUnit,youwillonlyneedtodothisonce.
Procedure
1OntheProcessorUnit,closetheEK80program.
2OpentheNetworkConnectionsdialogbox.
aInthebottom-leftcornerofyourdesktop,selecttheWindows
®
searchfunction.
bInthesearchbox,type"NetworkConnections",andopentheNetwork
Connectionsdialogbox.
3Right-clickthenetworkadapteryouaregoingtouseandselectPropertiesonthe
shortcutmenu.
4Onthelistofconnections,selectInternetProtocol4(TCP/IPv4),andthenProperties.
5SelectUsethefollowingIPaddress,andtypetheIPaddressandnetworkmask.
•IPAddress:157.237.15.12
Settingtowork