Kongsberg Simrad EK80 - Page 231

394149/D
229
andthesensorisconnected,youmustdenethedatagrampriorityandnalizethe
conguration.
Note
JustmakingchangesandselectingOKatthebottomofthepagewillnotinstallanything.
Selectwhattoinstall,denetherelevantparameters,andthenselectAdd.
Procedure
1OpentheSetupmenu.
2OntheSetupmenu,selectInstall.
ObservethattheInstallationdialogboxopens.Thisdialogboxcontainsanumber
ofpagesselectedfromthemenuontheleftside.
3Setuptheinterfacestothenavigationsensors.
aOntheleftsideoftheInstallationdialogbox,selectI/OSetup.
bSetuptherelevantserialorEthernet(LAN)communicationparameters.
cAtthebottomofthepage,selectApplytosaveyoursettings.
dOntheleftsideoftheInstallationdialogbox,selectSensorInstallation.
eSelectthetypeofsensoryouwanttointerface,anddenetherelevant
parameters.
fSelectAddtosavethenewsensorinterfaceyouhavedened.
gOntheleftsideoftheInstallationdialogbox,selectSensorConguration.
hDenethepriorityofthedatagrams,andsetuprelevantconguration
parameters.
iAtthebottomofthepage,selectApplytosaveyoursettings.
4Repeatforeachsensorinterfacethatyouneedtosetup.
5ContinueyourworkintheInstallationdialogbox,orselectOKtocloseit.
Relatedtopics
Interfacingperipheralequipment,page228
Settingtowork