Kongsberg Simrad EK80 - Page 264

262
394149/D
Caution
YoumustneversettheEK80to"ping"unlessthetransducerissubmergedinwater.
Thetransducermaybedamagedifittransmitsinopenair.
•Alltherelevanttransceivershavebeensetup,andtheyareoperationalwiththeir
respectivetransducers.
•Allrelevantchannels(transceiver/transducercombinations)areinstalledintheuser
interface.
•AllrelevantexternalsensorsareconnectedtotheEK80.Thesensorsareturned
onandoperatenormally.
•Thevesselisberthedoratsea.
Procedure
1OpentheSetupmenu.
2OntheSetupmenu,selectInstallation.
ObservethattheInstallationdialogboxopens.Thisdialogboxcontainsanumber
ofpagesselectedfromthemenuontheleftside.
3Ontheleftside,selectTransceiver.
4Makesurethatallapplicabletransceiversandtransducersareconnectedand
operational.
Foreachtransceiver,thisisindicatedbythegreenlabelwithtext"Installed".
5RepeatthiscycleforeachWideBandTransceiver(WBT)inuse.
aClickonthetransceivertoselectit.
bInthetransceiverlist,readthenameofthetransducerinuse.
cIntheTransceiverInformationeld,readthefollowinginformation:
•Identity
•TXFirmwareversion
•RXFirmwareversion
•Softwareversion
6Fillintheresulttable.
7ClosetheInstallationdialogbox.
SimradEK80InstallationManual