EasyManua.ls Logo

Konica Minolta C71cf - User Manual

Konica Minolta C71cf
143 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Before Using This Machine
Printing Workflow
Handling paper
Cleaning
Troubleshooting
Appendix
1
2
3
4
5
6
Quick Guide

Table of Contents

Questions and Answers

  • D
    Daniel EdwardsAug 2, 2025
    What to do if Konica Minolta C71cf Label Maker stops due to Paper Mismatch during Printing?
    • E
      eduardoadamsAug 2, 2025
      To resume printing after a paper mismatch, you can: - Start the printing job after changing the media to match the printing job's settings. - Start the printing job after setting [Paper Setting] to the paper type that is set for the printing job and changing the media to the appropriate type. - Force print on the set media regardless of the paper setting.
  • T
    Tracy PrestonAug 11, 2025
    How to clear paper jams on Konica Minolta C71cf?
    • K
      kimberlylongAug 11, 2025
      When a paper misfeed occurs, the Label Maker displays the JAM code and the location of the misfeed on the screen. If the cause is: - J-1711 or J-3105: Remove the paper inside the main body, and then open and close the front door of the main body. - J-1714: Check the condition and tension value of the paper set, and then open and close the front door of the main body. - J-3112: Remove the paper inside the main body, and then open and close the front door of the main body. Adjust the position of set media, if necessary.
  • M
    Michael DeanAug 22, 2025
    What to do if Konica Minolta C71cf displays JAM code J-5102?
    • D
      Derrick JacobsonAug 22, 2025
      Remove the paper from inside the main body, and then open and close the front door of the main body.

Summary

Before Using This Machine

Power-On;Off

Details the procedure for turning the main and sub power switches on and off.

Machine Panel Overview

Explains the main body and roll winder control panels and their functions.

Printing Workflow

Preparation Before Printing

Steps to clean, prepare media, and adjust the machine prior to printing.

Job Printing Process

Guide on creating, sending, test printing, and printing full jobs.

Post-Printing Operations

Procedures to follow after a print job is completed.

Handling paper

Media Route Explanation

Illustrates the path the media takes through the machine.

Changing the Media

Step-by-step guide on how to replace the paper or media.

Replacing the Media Core

Instructions for replacing the media core after a print job.

Splicing Media for Jams

Guide on connecting media for cleaning or clearing paper jams.

Adjusting Media Tension

Details on adjusting media tension based on type and thickness.

Machine Cleaning

Cleaning Parts and Intervals

Lists parts and recommended intervals for machine cleaning.

Daily Cleaning Procedures

Steps for routine daily cleaning of machine components.

Weekly Cleaning Procedures

Instructions for cleaning the machine on a weekly basis.

Exterior Cleaning

Guide on cleaning the external surfaces of the machine.

Control Panel Cleaning

Instructions for cleaning the machine's control panel.

Troubleshooting and Error Resolution

Replenishing Toner Supply

Steps to take when the toner supply is low or empty.

Replacing Waste Toner Box

Procedure for replacing the waste toner box when it's full.

Handling Paper Mismatch

How to handle print jobs when paper type mismatches occur.

Clearing Paper Jams

Instructions on how to locate and clear paper jams.

Media Feeding Errors

Diagnoses and remedies for common media feeding issues.

Resetting Emergency Stop

Steps to reset the machine after an emergency stop.

Administrator Password Recovery

Guidance on retrieving or resetting administrator password.

Appendix

Using the HTML Users Guide

Tips and methods for effectively using the HTML User's Guide.

Component Identification

Identifies and describes the various parts of the machine.

Typical Specifications

Lists the key technical specifications of the machine and accessories.

Konica Minolta C71cf Specifications

General IconGeneral
Label Material CompatibilityPaper, PP, PET
ConnectivityEthernet
KeyboardNot applicable
CutterOptional
PeelerOptional
Supported Barcode TypesCode 39, Code 93, Code 128, EAN 8/13, UPC-A/E, Interleaved 2 of 5, Data Matrix, QR Code, PDF417
Power SupplyAC 200-240V, 50/60Hz
Operating Humidity30-70% RH (non-condensing)

Related product manuals