Konica Minolta C71cf - Machine Panel; Control Panel (Main Body)

1-6
1.2 Machine Panel
1.2 Machine Panel
Control Panel (Main Body)
Power Save
Help
Accessibility
Utility/Counter
Stop
Start
Mode Check
Access
No. Name Description
1 Keypad Enters numeric values.
2 Power LED Lights up in red when the main power switch is turned on, then
turns green when the sub power switch is turned on.
3 Data LED Flashes while the machine is receiving print data.
4 Stop Suspends the current output job or stops the machine opera-
tion.
5 Start Activates various machine operations.
6 Start LED Lights up in blue when the machine is ready to operate.
It turns orange if no operation can be started.
7 C (Clear) Allows change in entered numeric value.
8 This is not available on this machine.
9 Mode Check Used to check settings of the print job in progress or those cur-
rently made.
10 Utility/Counter Displays the [UTILITY] screen and various counters.
11 Accessibility Adjusts the response time in touch panel and control panel
key operation.
12 Help Displays the Help screen that provides information on how to
operate the screen currently displayed on the touch panel.
Also provides various information about supply and disposal
when pressed with the [MACHINE] screen displayed.
13 Brightness adjustment dial Turned to adjust the brightness of the touch panel.