3-16
3.2 Changing the Media
)Adjusting the Aligning Roller (rotate/fix)
Change the setting of the aligning roller (rotate/fix) to adjust the tension.
% Pull the tab (1) of the aligning roller, and rotate it by 45 degrees to switch the aligning roller to
rotating or fixing.
- When the groove is vertical, it means rotating. When it is tilted, it means fixing. When you change the
aligning roller from rotating to fixing, rotate the aligning roller by hand until the aligning roller is
fixed.
- If you want to raise the tension, fix the aligning roller. If you want to lower the tension, rotate the
aligning roller.
To Next Page
Loading...
