5-10
5.4 Clear Paper Jams
JAM Code List
If a JAM code is displayed, clear the jam following the instructions described below.
JAM Code Jam location num-
ber
Where to check Function Instructions
J-1711 61 Feeding and con-
veying section
Paper does not
reach to the pre-
transfer sensor.
Remove paper in-
side the main body,
and then open and
close the front door
of the main body.
For instructions on
how to remove pa-
per, refer to
page 5-12.
J-1712 61 Conveyer sensor
error.
J-1713 61 Pretransfer sensor
error.
J-1714 62 Delivering rollers do
not spin.
Check the condition
and tension value of
paper set , and then
open and close the
front door of the
main body. For de-
tails, refer to
page 5-26.
J-1755 61 Conveyer sensor
error.
Remove paper in-
side the main body,
and then open and
close the front door
of the main body.
For instructions on
how to remove pa-
per, refer to
page 5-12.
J-1756 61 Pretransfer sensor
error.
J-3105 62 Fixing/delivering
section
Paper winds fusing
unit.
Remove paper in-
side the main body,
and then open and
close the front door
of the main body.
For details, refer to
page 5-28.
Important:
If the paper cannot
be pulled out from
the delivering sec-
tion, contact your
service representa-
tive.
J-3112 61 Feeding and con-
veying section
Centering improper. Remove paper in-
side the main body,
and then open and
close the front door
of the main body.
For instructions on
how to remove pa-
per, refer to
page 5-12.
Adjust the position
of set media, if nec-
essary. For details,
refer to page 4-16.
To Next Page
Loading...
